Test Bench Solutions

Embededded - Embedded System Trigger & Decode

Embedded System Trigger & Decode

Embedded System Trigger and Decode combines I2C, SPI, and UART Trigger and Decode options to provide a full Embedded Systems debug tool set.

Leading Features
  • I2C, SPI, UART and RS-232 Trigger and Decode
  • Color-coded decode overlaid on the waveform is intuitive and easy to read
  • Powerful and flexible conditional DATA triggering (=, <, <=, >, >=, <>, in range, out ofrange)
  • Hex, Binary or ASCII decoding
  • Decode information expands as the timebase is adjusted or zoomed
  • Convenient table display with quick "zoom to message" capability
  • Quick search capability for specific messages
  • Set an ACK condition (ACK,NO ACK, Don’t Care) in all frame trigger setups (I2C)
  • Decode does not require clock trace to be displayed (I2C, SPI)
  • Supports UART address (9-bit) Byte triggering
  • Supports trigger and decode of user defined proprietary protocols based on a UART backbone

Download Data Sheet

View Data Sheet

Automotive - VBA - Vehicle Bus Analyzer Option

Automotive - VBA - Vehicle Bus Analyzer Option

The VBA (Vehicle Bus Analyzer) bundle provides all of the necessary debug tools for addressing the most challenging automotive test challenges, ranging from CAN, LIN, or FlexRay. The VBA option is compatible with the WaveRunner 6 Zi, WavePro 7 Zi, WaveMaster 8 Zi, LabMaster 9 Zi. The VBA test solution includes the following options:

  • CanBus TDM
  • Symbolic CAN decoding with .dbc file
  • FlexRay TDP
  • LINbus TD
  • Protobus MAG

Download Data Sheet

View Data Sheet

Motor Testing - MDA800 Motor Drive Analyzers

Motor Testing - MDA800 Motor Drive Analyzers

Motor Drive Analyzers provide complete three-phase power analysis from motor drive input through motor mechanical output, with results in a convenient Numeric table format. Motor speed, position, and torque integration are the most complete available. Long memory, per-cycle “synthesized” Waveforms and Zoom+Gate mode provide powerful dynamic drive and motor analysis. 8 analog input channels (MSO optional) with high resolution (12-bits), sample rate (up to 2.5 GS/s), bandwidth (up to 1 GHz) and memory (up to 250 Mpt/ch) provide unique capability to perform complete system debug on the motor drive power section, motor mechanical performance, and embedded drive control system operation.

Key Features
  • Oscilloscope + Power Analyzer in one instrument
  • Complete motor drive system debug
  • Numerics measurement results table
  • Dynamic drive response analysis
  • Most complete motor mechanical integration
  • Intuitive, graphical user interface
  • HD4096 High Definition Technology

Download Data Sheet

View Data Sheet

Power Testing - Power Analyzer Package

Power Testing - Power Analyzer Package

Automatically and accurately analyze the performance of switched-mode power circuits

Key Features
  • Automatic switching device measurements
  • Color coded overlay to identify power losses
  • Control loop and time domain response analysis
  • Line power and harmonics tests to IEC 61000-3-2
  • Setup tools reduce sources of measurement error
  • Total harmonic distortion table shows frequency contribution
  • B-H Curve shows magnetic device saturation

Download Data Sheet

View Data Sheet

LED Testing - 3341G LED DC Electronic Load

LED DC Electronic Load Simulator
Features
  • LED mode load for LED Power Driver test.
  • CC, CR, CV, CP, LED and Dynamic mode.
  • Simulate LED Forward Bias Voltage (Vd) and Resistance (Rd).0
  • Fast Response for PWM dimming test.
  • Built-in dimming control signal for PWM dimming test.
  • Short circuit test by external relay (built-in short relay driver circuit).
  • 5 digital V / A / W Meter.
  • Protections against V, I, W, and ℃.
  • Can be configured in 3302F〔single channel mainframe〕、3305F〔two channels mainframe〕or 3300F〔four channels mainframe〕and the mainframe with 150 sets Store / Recall memory.
  • Optional Interface:GPIB、RS232、USB、LAN

Download Data Sheet

View Data Sheet

Multi Unit Testing –6010Charger / Adapter / LED Driver Test System Simulator

Charger / Adapter / LED Driver Test System
Features
  • Cost effective and full - featured modular design
  • Multi - function test capability for charger, adapter, LED driver power
  • Multi-U.U.T test simultaneously capability,significantly enhance the production line throughput
  • Support Windows 7/XP operation system
  • Open architecture software platform
  • 1. Support related hardware expansion
  • 2. User editable test item
  • 3. User editable test program
  • 4. User editable report format & statistical report
  • 5. On-line control function
  • 6. User authority control
  • 7. Support Bar Code Reader

Download Data Sheet

View Data Sheet

Battery / Power Supply Testing : 3610A-01Single/Multi Output Power Supply Tester

Single Output Power Supply Tester
Features
  • The 3610A includes AC Source, OVP DC Source, Timing and PARD measurement capabilities that is able to test power supply input, output, noise timing and protection features.
  • Load and line regulation can be tested separately or in combination.Static analysis with V-out% and PARD% can be provided.
  • 3610A was designed by load module, load specification (0~300W) can be changed based on requirement.
  • 3610A has a built-in EEROM to store test programs as many as 30 test programs can be stored in the 3610A.
  • 3610A uses the latest in Electronic Calibration technology. System software is stored in FLASH memory and can be upgraded via the RS232 interface. Updated versions can be downloaded directly to the tester.
  • Testing can be done either automatically or in a step by step mode.
  • Test reports can be printed out directly or stored in a PC via RS232 iterface. Test data can be transferred to EXCELTM file format for report customization
Test Functions
  • Hold-On Adjust
  • Load Regulation
  • Line Regulation
  • Combine Regulation
  • Efficiency
  • P-P Noise (PARD)
  • Set-up/Hold-up time
  • OVP
  • OCP
  • Short

Download Data Sheet

View Data Sheet